Menu:

Links:

Use these links to navigate the FAQ:

Next:
Technical support for ShapeStyles

Previous:
ShapeStyles Updates and Revision History

All about ShapeStyles index page

Updated
5/21/2018

Microsoft MVP Logo

Troubleshooting ShapeStyles problems



ShapeStyles Troubleshooting

Follow these troubleshooting steps in order will help you solve most problems in the shortest possible time.

Problems Installing ShapeStyles

PowerPoint includes security features that affect the way you'll install ShapeStyles. The information below will help you get ShapeStyles up and running quickly and easily. If you run into problems, see Tips & Troubleshooting below.

Before installing ShapeStyles

Start PowerPoint and configure its security settings:

Check for "zombie" copies of PowerPoint

Sometimes PowerPoint leaves extra copies of itself in memory. What that happens, these "zombie" copies of PowerPoint are invisible but cause problems for the visible one you're working with. To eliminate zombies, either restart Windows or do this:

Do you have a 64-bit version of Office?

Office 2010 and later are available in both 32-bit and 64-bit versions. The 64-bit version is not compatible with some of the PPTools add-ins.

Please Note: This has nothing to do with Windows32-bit vs 64-bit versions, only with the Office version. Even though you have a 64-bit version of Windows, you do not need a 64-bit version of Office. The 32-bit version works fine in 64-bit Windows; in fact, Microsoft recommends that you install the 32-bit version of Office unless you have a very specific NEED for the 64-bit version. Very few people do.

To learn which version of Office 2010 you have:

To learn which version of Office 2013/2016 you have:

Did you install a "Click to Run" version of Office 2010?

When you buy Office from Microsoft on the Web, they lead you into purchasing the so-called "Click to Run" version of Office. If your computer came with Office 2010 Starter Edition, that's a Click to Run (CTR) version of Office also.

CTR Office 2010 doesn't work with most normal software installers, so it's incompatible with many add-ins, ours included.

Check My Computer to see if you have a Q or R drive. If so, you probably have a CTR version of Office. It creates one or the other of those drive letters when it installs.

If you purchased Office and got the CTR version, you can convert it to a "real" version of Office. There's more information about that at Office 2010 Click-to-Run

Again, this applies only to the CTR version of Office 2010. Click To Run versions of Office 2013 and later ARE compatible with PPTools add-ins.

Check Trust Settings

If ShapeStyles won't load, choose File | Options | Trust Center, click Trust Center Settings... then choose Add-ins. In the Add-ins pane, make sure that "Require Application Add-ins to be signed by Trusted Publisher" is UNCHECKED. If it is checked, ShapeStyles cannot load.

If you aren't able to uncheck this option, it may be because a company policy requires it to be checked. There is a way to solve this problem; please have your IT staff contact us and request instructions. They can use the CONTACT US link on the left of this page.

Is VBA installed?

Visual Basic for Applications (VBA) may not be installed or may be disabled by system administrators. PPTools add-ins require VBA to run. To test whether VBA is installed:

Get the latest version

Make sure you have the latest version of ShapeStyles. Download the installer here, save it to any convenient folder and double-click it. You won't need to re-enter any registration information.

Security Settings

Overly restrictive security settings can prevent ShapeStyles from loading.

PowerPoint 2007/2010/2013/2016 security settings

Go to the PowerPoint options dialog box:

Then in PowerPoint 2007/2010/2013/2016:

After changing these settings, run the installer for ShapeStyles again.

User account permissions

If your user account has restricted privileges, you may not be able to install ShapeStyles. The ShapeStyles installer makes several registry entries to tell PowerPoint to load it at startup. If ShapeStyles doesn't appear anywhere in PowerPoint after it's installed, this is likely the problem.

To get around this problem, right-click the ShapeStyles installer program, choose Run As Administrator and if necessary, supply the necessary administrator password.
OR
Have an administrator temporarily grant you super-user or administrator privileges, install ShapeStyles, then change your privileges back to normal.

Note that it won't work to have the administrator log in and install ShapeStyles. Or rather it will work, but ShapeStyles will be installed for the administrator's log-in, not yours.

The installer may need to be able to write to this section of the registry:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\X\PowerPoint\AddIns\MASTTBAR

where X is the PowerPoint version number: 16.0 for 2016, 15.0 for 2013, 14.0 for 2010, 12.0 for 2007, 11.0 for 2003 and so on. And you caught it ... there's no 13.0

ShapeStyles needs to be able to read/write files in the folder where it's installed.

Does the problem recur?

  1. Quit PowerPoint and any other running programs then shut down your computer and turn the power off. Wait five minutes, then restart the computer
  2. Start PowerPoint, open the file you were working on, then see if you can make the problem happen again in ShapeStyles
  3. If the problem doesn't occur again, it may have been caused by some sort of temporary Windows or computer glitch. As long as it doesn't happen any more, you can consider the problem solved. No need to read further.

Is ShapeStyles not loading or not working at all?

PowerPoint sometimes disables add-ins like ShapeStyles for reasons that aren't always clear. To see if this is the case:

  1. Go to PowerPoint Options
  2. Click Add-Ins on the left
  3. On the right, next to "Manage:" choose "Disabled Items" then click "Go"
  4. If ShapeStyles is on the list, click it, then click "Enable".
  5. Click "Close" to close the Disabled Items dialog box.
  6. Click "OK" to close the PowerPoint Options dialog box.
  7. Restart PowerPoint.

Are other add-ins interfering with ShapeStyles?

Add-ins from other software developers may interfere with ShapeStyles and other add-ins (ours and others). Among the guilty:

If you haven't already done so, run the installer for ShapeStyles again. Sometimes that can solve problems with add-in conflicts. If that doesn't help, try disabling or uninstalling other add-ins, particularly so-called COM add-ins. You can get a list of installed add-ins by running a diagnostics report (see below)

Is rogue antivirus/malware/security software causing problems?

A bug in Kaspersky Internet Security software (2013 and possibly 2014 versions) causes PowerPoint 2013 to crash when some add-ins (ours and several others) are installed. The problem is clearly Kaspersky's, but their response to date seems to be "It's just PowerPoint, it doesn’t affect all that many people, who cares?" Unfortunately, the Kaspersky software is all but impossible to fully remove, and they don't offer a removal tool to help solve this problem. We suggest contacting Kaspersky Support to report the problem if you run into it.

Create a Diagnostics Report

If none of the suggestions above helps, but ShapeStyles or at least the MasterBar loads, send us a diagnostics report. A diagnostics report gives us a tremendous amount of information we can use to troubleshoot the problem. Here's how to create one:

  1. Start PowerPoint.
  2. In PowerPoint 2003 or earlier, from the main PowerPoint menu bar, choose PPTools, MasterBar, Help or click the Help (?) button on the MasterBar toolbar. The About ShapeStyles screen appears.
  3. In PowerPoint 2007 or later, click the Add-ins tab, choose PPTools, MasterBar, Help or click the Help (?) button on the MasterBar toolbar. The About ShapeStyles screen appears.
  4. Put a checkmark next to "Enable verbose logging" then click OK.
  5. Quit and restart PowerPoint, then open the file you were working on or do whatever else it takes to cause the problem to happen again. This will make sure that there's detailed information about the specific problem in the diagnostics report.
  6. Once the problem appears, open the About dialog box again.
  7. Click "Diagnostics".
  8. PPTools will create a diagnostic report and open it in Notepad so you can examine it.
  9. At the top of the report it tells you where the report file (named DIAGS.TXT) is saved. Attach the file to an email and send it to us at the email address that appears in the report.
  10. We suggest leaving "Enable verbose logging" checked until we've solved the problem. Then you can turn it back off.
[Previous] [Home] [Next]